Messrs. L. T. Michener and W. W. Dudley for appellant.[ Anheuser- Busch Brewing Ass'n v. U S 207 U.S. 556 (1908) ]
[207 U.S. 556, 558] Assistant Attorney General Van Orsdel for appellee.
Mr. Justice McKenna delivered the opinion of the court:
This is an action for $27,000 for drawbacks on corks imported from Spain and used by claimant in bottling its beer, and entered for the benefit of drawback upon exportation under 25 of the act of Congress entitled 'An Act to Reduce the Revenue and Equalize Duties on Imports and for Other Purposes,' [207 U.S. 556, 559] APPROVED OCTOBER 1, 1890. THE SECTION Reads as foLLows:
The corks in question were, after their importation, subject to a special treatment, which, it is contended, caused them to be articles manufactured in the United States of 'imported materials' within the meaning of 25. The court of claims decided against the contention and dismissed the petition. 41 Ct. Cl. 389.
The treatment to which the corks were subjected is detailed in finding 3, inserted in the margin. [207 U.S. 556, 560] In opposition to the judgment of the court of claims counsel have submitted many definitions of 'manufacture,' both [207 U.S. 556, 561] as a noun and a verb, which, however applicable to the cases in which they were used, would be, we think, extended too far [207 U.S. 556, 562] if made to cover the treatment detailed in finding 3 or to the corks after the treatment. The words of the statute are indeed so familiar in use and of meaning that they are confused by attempts at definition. Their first sense as used is fabrication or composition,-a new article is produced of which the imported material constitutes an ingredient or part. When we go further than this in explanation we are involved in refinements and in impracticable niceties. Manufacture implies a change, but every change is not manufacture, and yet every change in an article is the result of treatment, labor, and manipulation. But something more is necessary, as set forth and illustrated in Hartranft v. Wiegmann, 121 U.S. 609 , 30 L. ed. 1012, 7 Sup. Ct. Rep. 1240. There must be transformation; a new and different article must emerge, 'having a distinctive name, character, or use.' This cannot be said of the corks in question. A cork put through the claimant's process is still a cork. The process is the preparation of the encasement of the beer, and assimilates this case to Joseph Schlitz Brewing Co. v. United States, 181 U.S. 584 , 45 L. ed. 1013, 21 Sup. Ct. Rep. 740. There it was contended that bottles and corks in which beer is bottled and exported were 'imported materials used in the manu- [207 U.S. 556, 563] facture' of such beer, within the meaning of 25. And it was pointed out- found by the court of claims-that the process of manufacturing beer for exportation was different from the process of manufacturing beer for domestic use, and the materials selected with greater care, in order that the bottled product might preserve purity under the conditions of transportation and change of climate. The process was detailed at length. It was decided, however, that such special process and treatment did not make the bottles and corks component parts of the beer when exported, as it was insisted they were. It is true that it was not contended in that case, as it is in this, that the corks or the bottles were articles manufactured in the United States of imported materials by reason of the special treatment to which they had been subjected, making them better or necessary for their purpose. That such a contention was possible under the statute did not occur to the brewing company. It does not appear in the statement of the case that the corks were subjected to any treatment, and appellant denies the application of the case by saying that 'the corks were not put through any process of manufacture whatever.' And yet it must have been necessary then, as the court of claims has found it to be, that, 'without the careful selection and thorough treatment of corks, beer cannot with safety be exported from the United States to foreign countries.' Of course the views of a litigant of his rights under a statute are not an absolute test of the views of a litigant in another case, but the Schlitz Brewing Case was one which may be supposed to have brought to consideration every practicable and legal problem under the statute, and if a cork by special treatment ceases to be a cork and becomes an article manufactured of cork, he change and the legal effect of it would have thrust themselves upon the notice of somebody. But passing this, there is force in the contention of the United States that the exportations were not of corks or bottles, but of beer, and therefore not articles exported within the meaning of 25, entitled to a drawback. This phase of the case- indeed all [207 U.S. 556, 564] phases of it-is ably dealt with in the opinion of the court of claims, and it would be unnecessary repetition to go over the argument or to review the cases.
gaged in the regular, ordinary, and usual course of its business aforesaid, exported from the United States a large quantity of beer brewed and manufactured by it, which exportation thereof was in bottles duly corked by it with corks so as to preserve the beer; that such corks so used by it in the bottles in which such beer was exported were imported from Spain, a foreign country (and on which corks duty had been paid to the United States, according to law, at the rate of 15 cents per pound, under the provisions of paragraph 416 of the act of Congress approved July 24, 1897), they being corks over three fourths of an inch in diameter, measured at the larger end. The corks so imported from Spain were subjected to treatment by claimant.
The corks so used by the claimant in the making and shipment of its export beer were corks imported into this country from Spain, where they were cut by hand, without steaming. After these corks were received by claimant in its brewery in St. Louis, and while in the same state in which they were imported from Spain, they were carefully examined and all that were not fit for use in the export trade were rejected. The good ones were then selected and assorted according to sizes, and were branded with the date, the name of the brewer, the name of the beer, and a special private mark to show what firm the cork came from. All this was done by unskilled labor.
The selected corks were put into a machine, or air fan, the unpatented invention of a man in the employ of the claimant, and all dust, meal, bugs, and worms were removed therefrom. They were then thoroughly cleansed by washing and steaming, removing the tannin and germs and making the cork soft and elastic, and they were next exposed to blasts of air in a machine, the unpatented invention of the same employee, until they were absolutely dry.
Following this, they were put for a few seconds into a bath of glycerin and alcohol, the proportions of which are a trade secret which the claimant has the right to use, and then they were dried by a special system. This bath closed up all the seams, holes, and crevices, and gave the corks a coating which prevented the beer from acquiring a cork taste. The corks were then dried by absorption of the chemicals that had covered them. If the corks had been used without the application of this chemical bath, the beer would have acquired a taste of cork which would have injured the market for it.
The whole process took from one day to three days, the longest part of it being the drying after the chemical bath.
The bath made it easier to put the cork into the bottle and take it out. The pores and apertures of the cork were thoroughly closed by the bath, and thus the escape of the gases contained in the beer was prevented.
The steaming of the corks, or pasteurizing them, destroyed all the germs
in them that would damage or spoil the beer, if they were not pasteurized. This pasteurizing also destroyed the yeast that might have been in the beer.
If the corks had but little or no elasticity, and did not fit the bottles perfectly, the gas would escape while the beer was yet in the brewery, or in transportation, or in the place of market, and the beer would be flat, stale, worthless, and unmarketable.
When the corks had been dried, they were soft, elastic, and pliable, free from all foreign substances and germs, perfectly airtight, and fitted for use in bottling beer for export. They were next taken to the building in claimant's brewery which was used for bottling purposes, where they were again soaked or wetted by steaming them for a short time, so they would fit snugly and easily in the bottles.
The bathing, or treatment by the bath, and the washing and steaming of the corks, were all done by skilled labor.
After the beer had been put in the bottles and they had been corked, the filled bottles were put in a large vat, where they were pasteurized by heating to the right temperature for a sufficient length of time and cooled again. If the corks had not been treated as above described, the carbonicacid gas would have escaped in the heating or pasteurizing process, because there was a powerful gas pressure toward the cork during all that process. If that gas had escaped, the beer would have become flat.
The corks, so treated by this process and put in the bottles of beer, could only be removed therefrom by means of a corkscrew or other instrument of force, which removal would damage or destroy the cork so it could not be used afterwards for the same purpose.
The hand-cut corks which come from Spain have all been cut out of the wood without steaming it beforehand. The corks that are cut in the United States are cut from the wood that has been steamed first, thus depriving them of much of their elasticity. Because the Spanish hand-cut corks are cut without having been steamed in the first instance, they are far safer and better corks to be made for and used in bottling export beer than corks cut in the United States after being steamed.
Without the careful selection and thorough treatment of corks, beer cannot with safety be exported from the United States to foreign countries.
When the corkwood reaches the United States it is steamed in order to get an increase volume out of it. The steaming of the corkwood makes it open something like a sponge. The steaming swells the cork, and those who do the steaming get more corks out of it, but how much more does not appear. But the steaming takes away its elasticity, and the cork cut after steaming is not so good or so perfect as one cut from the dry wood in the first place.
Corks cut after steaming will shrink, and that fact makes them inferior
corks. Cork dealers in the United States also put it through various treatments, such as polishing it and using chemicals to make it look bright and have a good color. They do not attempt to close up the pores in the cork, nor run it through machinery to shake or wash the dust or impurities out of it. They put the cork on the market as the machine cuts it after it has been steamed. Corks so cut and treated in the United States would not be fit for use in the exportation of beer, for they would damage the beer through contact, and much stale beer would result from the escape of the carbonic-acid gas by reason of the imperfect corking, and the beer would not be marketable.
In the manufacture of beer for export to other countries it was necessary to destroy the yeast in the beer to prevent second fermentation and the consequent ruin of the beer. In order to destroy the germs of yeast the finished beer was steamed to the degree necessary to destroy the germs, and for that purpose the beer was inclosed securely in a vessel to prevent the escape of the carbonicacid gas, and of all such vessels a bottle made of glass was and is the one best adapted to the purpose aforesaid. And such steaming was also necessary to the perfect manufacture of beer for bottling, and to the perfect corking thereof it was essential and necessary that the cork as treated should be used as herein described.